5 Axis CNC Machining Services in China
- No MOQ limitation
- Tight Tolerances: ±0.005mm
- Fast delivery coordination
- 100+ Surface Finishes Options
- 50+ metal and plastic materials
Precision 5 Axis CNC Machining Services from China
What Is 5 Axis CNC Machining?
JADE-CNC 5 Axis Machining for Complex Precision Parts
The Advantages Of 5 Axis CNC Machining
Single-Setup Machining
A complex part can be machined on all five sides in one clamping
Ability to Machine Complex Geometries
It can create deep cavities, undercuts, organic surfaces, complex contours, and angled features
Improved Surface Finish & Accuracy
The machine can use the side of the cutter (where cutting speed is higher) rather than just the tip
Cost-Efficiency & Enhance Speed
5 Axis machine uses shorter, more rigid tools, allows for higher feed rates and deeper cuts, reducing total machining time.
Reduced Need for Special Fixtures
The rotational axes provide the necessary angles, minimizing the need for complex, custom-made holding jigs.
Comparative Analysis of 3-Axis, 4-Axis, and 5-Axis CNC Machining
|
Feature |
3-Axis CNC |
4-Axis CNC |
5-Axis CNC |
|---|---|---|---|
|
Movement |
X, Y, and Z axes |
X, Y, Z axes + rotation around one axis (A or B) |
X, Y, Z axes + rotation around two or more axes (A, B, C) |
|
Precision |
High precision for simple parts |
High precision for multi-sided machining |
Unmatched precision for complex geometries and angles |
|
Complexity of Parts |
Suitable for simple, 2D shapes or parts with simple features |
Can handle parts with multiple sides and slightly complex geometries |
Ideal for intricate, highly complex 3D shapes and designs |
|
Set-Up Time |
Shorter setup time, simpler programming |
Moderate setup time, requires more setup than 3-axis |
Longer setup time, requires more complex programming |
|
Tool Access |
Limited to machining along one plane at a time |
Able to access multiple sides of a part in one setup |
Capable of machining from virtually any angle, reducing the need for re-fixturing |
|
Surface Finish |
Good for basic surface finishes |
Better for complex parts with better surface finishes |
Superior surface finish with minimal post-processing |
|
Cost |
Most cost-effective |
More expensive than 3-axis but less than 5-axis |
Most expensive due to advanced technology and setup |
|
Cost |
Most cost-effective |
More expensive than 3-axis but less than 5-axis |
Most expensive due to advanced technology and setup |
|
Typical Industries |
Automotive, electronics, prototyping |
Aerospace, automotive, manufacturing, general industries |
Aerospace, medical devices, defense, high-end automotive, tooling |
CNC Metal Materials We offer
JADE-CNC offers 50+ metal and plastic material options for custom 5-axis CNC machined parts. Below are commonly used materials for your reference.
CNC Plastic Materials We Offer
The preferred choice for low-cost prototyping, especially for parts requiring functional testing, assembly checks, and aesthetic evaluation. JADE-CNC use them for Product enclosures, automotive interior parts, and functional prototypes.
Price: $$
Lead Time: < 5 days
Wall Thickness: 0.75 mm
Tolerances:±0.125mm (±0.005″)
Max part size: 200 x 80 x 100 cm
PEEK is a kind of material which is suitable for parts needing light weight, corrosion resistance, and low cost in damp or chemical environments. PEEK is always been used them for chemical tank liners, buoys, conveyor wear strips, and outdoor products.
Price: $$
Lead Time: < 5 days
Wall Thickness: 0.75 mm
Tolerances: ±0.125mm (±0.005″)
Max part size: 200 x 80 x 100 cm
PTFE is always reserved for specialized environments requiring extreme temperature resistance, resistance to strong chemicals, or ultra-low friction/non-stick properties. And it’s been used for Seals, gaskets, valve liners, insulating parts, laboratory ware, substrate for non-stick coatings.
Price: $$
Lead Time: < 5 days
Wall Thickness: 0.75 mm
Tolerances: ±0.125mm (±0.005″)
Max part size: 200 x 80 x 100 cm
PC has always been known to be the best chosen for applications demanding a combination of high impact resistance, transparency, and thermal stability. JADE-CNC ever used them for those high transparent parts, such as safety goggles, riot shields, automotive light covers, electronic device housings, high-strength transparent components.
Price: $$
Lead Time: < 5 days
Wall Thickness: 0.75 mm
Tolerances: ±0.125mm (±0.005″)
Max part size: 200 x 80 x 100 cm
PMMA has exceptional optical clarity (>92%), good weatherability, high surface hardness, and can be polished to a crystal-clear finish. It’s the top choice when high transparency, excellent appearance, and UV/weather resistance are required. JADE-CNC uses them for lighting prototypes.
Price: $$
Lead Time: < 5 days
Wall Thickness: 0.75 mm
Tolerances: ±0.125mm (±0.005″)
Max part size: 200 x 80 x 100 cm
Epoxy Board is valued in CNC machining for its excellent electrical insulation, good mechanical strength, dimensional stability, and versatility. Which can be used for enclosures of electrical equipment, lightweight structural panels where electrical isolation is key. You can design it for structural parts requiring more rigidity than acrylic but where metal is unnecessary.
Price: $$
Lead Time: < 5 days
Wall Thickness: 0.75 mm
Tolerances: ±0.125mm (±0.005″)
Max part size: 200 x 80 x 100 cm
POM’s other name is “metal substitute.” which features high stiffness, excellent dimensional stability, a very low friction coefficient, and superior creep resistance. Machines to a smooth, satin-like finish. POM is perfect for precision mechanical parts needing high rigidity, low friction, and dimensional accuracy, often to replace metal for weight saving or corrosion avoidance. POM can be used for precision gears, bearings, cams, valves, knife handles, and lock components.
Price: $$
Lead Time: < 5 days
Wall Thickness: 0.75 mm
Tolerances: ±0.125mm (±0.005″)
Max part size: 200 x 80 x 100 cm
Nylon is an ideal material for moving parts requiring high wear resistance, low friction, and durability under cyclic loading. JADE-CNC ever processed Nylon for Gears, bearings, rollers, jigs, wear-resistant bushings.
Price: $$
Lead Time: < 5 days
Wall Thickness: 0.75 mm
Tolerances: ±0.125mm (±0.005″)
Max part size: 200 x 80 x 100 cm
PP has good fatigue resistance, excellent resistance to chemical solvents, and good electrical insulation. Brittle at low temperatures, which is suitable to apply in parts requiring light weight, chemical resistance, living hinge design, or single-use/disposable items.
Price: $$
Lead Time: < 5 days
Wall Thickness: 0.75 mm
Tolerances: ±0.125mm (±0.005″)
Max part size: 200 x 80 x 100 cm
CNC Metals Materials We Offer
Aluminum is the best choice of “strength-weight-machinability-cost” metal. which can do fast machining speed, excellent surface finish, corrosion-resistant, and can be anodized for color.
Representative Grades: 6061-T6, 7075-T6, ADC12
Price: $$
Lead Time: < 5 days
Wall Thickness: 0.75 mm
Tolerances:±0.125mm (±0.005″)
Max part size: 200 x 80 x 100 cm
Primary Applications is Mechanical structural parts, like prototypes, fixtures, shafts, gears, bolts—functional parts not requiring extreme strength or corrosion resistance.
Representative Grades: 304/316L (Austenitic); 303 (Free-Machining)
Price: $$
Lead Time: < 5 days
Wall Thickness: 0.75 mm
Tolerances:±0.125mm (±0.005″)
Max part size: 200 x 80 x 100 cm
Extreme hardness and wear resistance, used for tools that machine other materials or parts suffering severe abrasion. Which common applies in Punches, dies, cutting tools, wear components for jigs, gauges
Price: $$
Lead Time: < 5 days
Wall Thickness: 0.75 mm
Tolerances:±0.125mm (±0.005″)
Max part size: 200 x 80 x 100 cm
Highest electrical and thermal conductivity among common engineering metals (second only to silver), but soft and gummy, making it more challenging to machine than brass. Copper common applies in Busbars, heat sinks, EDM electrodes, microwave components, applications demanding ultimate thermal/electrical conductivity
Price: $$
Lead Time: < 5 days
Wall Thickness: 0.75 mm
Tolerances:±0.125mm (±0.005″)
Max part size: 200 x 80 x 100 cm
Brass is a versatile copper-zinc alloy renowned for its excellent machinability, attractive gold-like appearance, and good mechanical and corrosion-resistant properties. It is a staple material in CNC machining, especially for parts requiring high precision, smooth finishes, and complex geometries.
Price: $$
Lead Time: < 5 days
Wall Thickness: 0.75 mm
Tolerances:±0.125mm (±0.005″)
Max part size: 200 x 80 x 100 cm
Bronze is prized for its high strength, excellent wear resistance, good corrosion resistance (especially to seawater), and low friction properties against other metals. It is a fundamental material for bearings, bushings, gears, and marine components.
Price: $$
Lead Time: < 5 days
Wall Thickness: 0.75 mm
Tolerances:±0.125mm (±0.005″)
Max part size: 200 x 80 x 100 cm
Lowest cost, easy to machine, excellent weldability, but prone to rust (usually requires plating or painting). The Primary Applications are Mechanical structural parts, prototypes, fixtures, shafts, gears, bolts—functional parts not requiring extreme strength or corrosion resistance.
Price: $$
Lead Time: < 5 days
Wall Thickness: 0.75 mm
Tolerances:±0.125mm (±0.005″)
Max part size: 200 x 80 x 100 cm
Lightest commercial metal (density ~2/3 of aluminum), high specific strength, good damping capacity, easy to machine, Magnesium alloy wildly used for Aerospace, 3C electronics, race wheels, portable devices—fields with extreme weight-saving requirements.
Price: $$
Lead Time: < 5 days
Wall Thickness: 0.75 mm
Tolerances:±0.125mm (±0.005″)
Max part size: 200 x 80 x 100 cm
Titanium is a high-performance, lightweight metal renowned for its exceptional strength-to-weight ratio, outstanding corrosion resistance, and excellent biocompatibility. While challenging and expensive to machine, it is indispensable in aerospace, medical, and high-end engineering applications with its unique properties.
Price: $$
Lead Time: < 5 days
Wall Thickness: 0.75 mm
Tolerances:±0.125mm (±0.005″)
Max part size: 200 x 80 x 100 cm
5 Axis CNC Machining Tolerances
JADE-CNC adheres to ISO 2768 (medium) for plastics and ISO 2768 (fine) for metals. We consistently achieve CNC tolerances ranging from ±0.005″ (±0.125mm) to ±0.002″ (±0.05mm), ensuring precision across all applications.
For tighter tolerances, we utilize your 3D drawings to meet exact specifications, guaranteeing optimal accuracy and performance.
|
Type |
Tolerance |
|---|---|
| Standard Tolerances | Metals: ISO 2768-f / Plastics: ISO 2768-m |
| Maximum Part Size | 157.5 * 59.1 * 23.6 inch |
| Minimum Part Size | 0.1×0.1 inch |
| Minimum Feature Size | Φ 0.00197 inch |
| Linear Dimension | +/- 0.001 inch |
| Hole Diameters(Not Reamed) | +/- 0.001 inch |
| Shaft Diameters | +/- 0.001 inch |
Why Choose JADE-CNC
Competitive Quotation
Competitive pricing supported by optimized 5-axis CNC machining processes, efficient material planning, and practical cost management.
Payment
JADE-CNC provides almost 5 ways for customers to arrange the payment, individual person or big corporation are all acceptable, from USA & EU to other global countries customers.
Rapid Delivery Time
JADE-CNC coordinates express and bulk delivery options for global 5-axis CNC machining projects after production and inspection are completed.
15+ Years of Experience
JADE-CNC is experienced in global market, especially in USA & EU, we have more than 15 years of cooperation with many global companies.
7*24 Engineering Support
JADE-CNC 7*24 online support allows for immediate, on-demand problem resolution. We provide detailed engineering support to make your part to reality.
How to Cooperate with JADE-CNC
We manufacture metal and plastic 5-axis CNC machined parts to match your drawings, performance requirements, and project schedule.
Send CAD files
Click any quote button on our website, fill in your requirements and upload the drawings.
Contact alan@jadecnc.com to send your CAD files.
Quote Analysis
Our engineers review the drawings, identify manufacturability risks, and provide practical pricing for production.
Order Confirmed
After you confirm the quote, samples will be sent for approval, then bulk will be made.
Get Your Parts
Custom parts will be inspected by QC and then delivered directly to you by international express.
Get Your Custom 5 Axis CNC Machining
Parts Today!
From concept to final production, JADE-CNC supports custom 5-axis CNC machining projects with engineering review, precision machining, finishing, inspection, and delivery coordination. Share your drawings, material, quantity, tolerance, and finish requirements, and our team will prepare a practical quote for your complex precision parts.
FAQ
No MOQ. We really understand the RD phase specialize in supporting projects from a single prototype through to low-volume production. We understand R&D needs and apply the same rigorous process and quality control, whether for one part or one hundred.
Please provide your 3D model (STEP/IGES preferred) and 2D drawings (with critical dimensions, tolerances, material, and finish specified). We will provide a transparent, detailed quotation based on machining time, material, complexity, and post-processing, with no hidden costs.
For parts of standard complexity, our typical CNC machining lead time is 7-15 working days (from confirmed drawings/payment). We offer expedited service with delivery in 1-3 working days, subject to part evaluation and an additional rush fee.
Our standard machining tolerance is ±0.025 mm (±0.001″). For critical features, we can achieve ±0.005 mm (±0.0002″) or better, depending on part geometry and material. We will perform a DFM analysis and confirm all critical tolerances with you upon receiving your drawings.
Yes, it’s part of our standard process. We perform First Article Inspection (FAI) and can provide inspection reports (e.g., dimensional check sheets, CMM data for critical features) upon request. Our full suite of inspection tools (calipers, micrometers, CMM, etc.) ensures every batch meets your specifications.
We stock various aerospace and commercial-grade metals and plastics, such as Aluminum (6061, 7075), Stainless Steel (304, 316), Carbon Steel, Brass, PEEK, Delrin, etc. For critical projects, we can provide mill certificates for the raw materials upon request.
Your intellectual property is our top priority. We are glad to sign a legally-binding Non-Disclosure Agreement (NDA) before any project begins. All digital files are stored on encrypted servers with access strictly limited to the project team.
We are committed to 100% customer satisfaction. If a non-conformance is confirmed to be our manufacturing fault, we will remake or repair the parts at no cost and cover the resulting shipping fees. We ask that you inspect the parts promptly upon receipt and provide a detailed description with photos/video.
We provide various post-processing services, including: Bead blasting, Anodizing (Type II & III, various colors), Electroless Nickel Plating, Passivation, Electroplating, Powder Coating, and Silk Screening. We can advise based on your functional or aesthetic requirements.
For new clients, our standard terms are “50% deposit to start production, 50% balance before shipment.” We accept international payment methods like Wire Transfer and PayPal. Terms can be discussed for established, long-term partnerships.