CNC Machining Materials Guide
Use this CNC machining materials guide to compare metal and plastic options for custom machined parts. Material choice affects strength, وزن, مقاومة التآكل, الموصلية, مقاومة الحرارة, tolerance stability, الانتهاء من السطح, ومتطلبات التفتيش.
Common CNC Machining Materials Used by JADE-CNC
JADE-CNC manufactures prototype and production parts from commercially available metal CNC machining materials and plastic CNC machining materials, and can also review customer-supplied materials when required. This material guide helps buyers compare CNC material properties, machining behavior, تأثير التشطيب, tolerance stability, and inspection needs before sending an RFQ.
تصنيع المعادن باستخدام الحاسب الآلي
Metal CNC machined parts are commonly made from aluminum, الفولاذ المقاوم للصدأ, نحاس, النحاس, التيتانيوم, and alloy steel when strength, صلابة, الموصلية, مقاومة الحرارة, مقاومة التآكل, or dimensional stability is required. JADE-CNC can review aluminum CNC machining, stainless steel machining, copper machining, تصنيع التيتانيوم, alloy machining, and related finishing or inspection requirements according to the drawing.
التصنيع باستخدام الحاسب الآلي Superalloy
High-temperature and corrosion-resistant alloys may be selected for demanding industrial parts when strength, مقاومة الحرارة, and inspection requirements justify the machining difficulty. JADE-CNC reviews tooling, cutting strategy, and quality requirements before quotation.
التصنيع باستخدام الحاسب الآلي بالوعة الحرارة
Heat sink materials and geometry affect thermal performance, machining cost, الانتهاء من السطح, والتجمع. JADE-CNC reviews fins, channels, التسطيح, مادة, and finish requirements before machining heat sink components.
تصنيع سبائك كوفار باستخدام الحاسب الآلي
Kovar alloy is used when controlled thermal expansion is important for glass, ceramic, or semiconductor-related assemblies. Drawing requirements, السيطرة على التسامح, and inspection should be reviewed before machining.
تصنيع البلاستيك باستخدام الحاسب الآلي
Engineering plastics such as ABS, أكريليك, البولي, نايلون, نظرة خاطفة, بتف, and acetal can be used for plastic machining when lightweight, عازلة, شفاف, chemically resistant, or low-friction parts are required. الاستقرار المادي, moisture absorption, السيطرة على لدغ, الانتهاء من السطح, and tolerance behavior should be reviewed early.
حل التصنيع باستخدام الحاسب الآلي وقفة واحدة
For projects that need machining, التشطيب, تقتيش, and assembly support, JADE-CNC coordinates the manufacturing workflow so drawings, متطلبات المواد, الانتهاء من السطح, quality checks, and delivery expectations stay aligned.
دليل اختيار مواد التصنيع باستخدام الحاسب الآلي
Material selection affects machining cost, استقرار الأبعاد, الانتهاء من السطح, قوة, وزن, مقاومة التآكل, الموصلية, والتفتيش النهائي. JADE-CNC can review material options based on the drawing, part function, production quantity, متطلبات الانتهاء, and application environment.
| مادة | Category | الخصائص الرئيسية | القدرة على التصنيع | Typical CNC Applications | خيارات إنهاء السطح |
|---|---|---|---|---|---|
| الألومنيوم 6061-T6 | الألومنيوم | General-purpose, خفيفة الوزن, مقاومة للتآكل | ممتاز | المساكن, بين قوسين, تركيبات, أجزاء الاتصالات | أنودة, تفجير حبة, طلاء مسحوق |
| Aluminum 7075-T6 | الألومنيوم | High strength-to-weight ratio | جيد | Structural brackets, robotics components, precision frames | أنودة صعبة, تفجير حبة |
| الفولاذ المقاوم للصدأ 304 | الفولاذ المقاوم للصدأ | Corrosion resistant, widely available | واسطة | Industrial parts, medical device components, تركيبات | التخميل, تلميع, تفجير حبة |
| الفولاذ المقاوم للصدأ 316 | الفولاذ المقاوم للصدأ | Better corrosion resistance in harsh environments | واسطة | طبي, البحرية, chemical-exposure components | التخميل, التلميع الكهربائي |
| الكربون الصلب 1018 | الكربون الصلب | Low carbon, فعالة من حيث التكلفة, سهلة الآلة | ممتاز | General machinery parts, لوحات, مهاوي | Black oxide, zinc plating, تلوين |
| Copper C110 | نحاس | High thermal and electrical conductivity | عدل | Heat-transfer parts, busbars, RF components | تلميع, طلاء النيكل |
| Brass C360 | النحاس | Free-cutting, stable finish, good conductivity | ممتاز | موصلات, الصمامات, التجهيزات, أجزاء تحولت | Nickel plating, تلميع |
| بوم / ديلرين | Engineering Plastic | احتكاك منخفض, مستقر, good wear properties | ممتاز | التروس, sliding parts, تركيبات, البطانات | كما تشكيله |
| نظرة خاطفة | High-Performance Plastic | High temperature and chemical resistance | جيد | طبي, aerospace-adjacent, demanding engineering parts | كما تشكيله |
| جهاز كمبيوتر | Engineering Plastic | Impact resistance and possible transparency | جيد | Covers, protective parts, transparent components | تلميع, تلوين |
Not sure which material is suitable for your CNC machined part?
Send the drawing, طلب, كمية, and finish requirement for material review.
What JADE-CNC Reviews Before CNC Material Selection
Choosing a CNC machining material is not only about selecting a grade from a list. The right material should match the part function, طريقة التصنيع, شرط التسامح, الانتهاء من السطح, application environment, واحتياجات التفتيش.
Material Function
JADE-CNC reviews whether the part needs strength, وزن منخفض, مقاومة التآكل, الموصلية الكهربائية, مقاومة الحرارة, مقاومة التآكل, العزل, or dimensional stability.
القدرة على التصنيع
Different metals and plastics affect tool wear, سرعة القطع, السيطرة على لدغ, surface quality, and machining cost. The machining route should match the material behavior.
Tolerance Stability
Material stress, سمك الجدار, المعالجة الحرارية, moisture absorption, and part geometry can affect dimensional stability during and after machining.
Surface Finish Compatibility
أنودة, تصفيح, التخميل, تلميع, تفجير حبة, تلوين, and coating requirements should be checked against the selected material and functional surfaces.
Inspection and Traceability
For projects that need reports or material records, JADE-CNC can coordinate dimensional checks, selected feature inspection, material confirmation, and documentation requirements.
Common CNC machining materials include aluminum, الفولاذ المقاوم للصدأ, carbon steel, alloy steel, نحاس, النحاس, التيتانيوم, بوم, نظرة خاطفة, بتف, جهاز كمبيوتر, ABS, أكريليك, نايلون, وغيرها من اللدائن الهندسية.
Start from the part function. قوة, وزن, مقاومة التآكل, الموصلية, مقاومة الحرارة, tolerance stability, الانتهاء من السطح, and inspection requirements should be considered together.
Common aluminum grades include 6061, 7075, 2024, 5052, 6063, and MIC-6 tooling plate. Each grade has different strength, القدرة على الماكينات, مقاومة التآكل, and finishing behavior.
Stainless steel is often selected when corrosion resistance, قوة, مقاومة التآكل, or appearance is important. 304 و 316 are common options for CNC machined stainless steel parts.
Copper and brass are often used when electrical conductivity, الموصلية الحرارية, or stable machining of small turned features is important.
نعم. بوم, نظرة خاطفة, بتف, جهاز كمبيوتر, ABS, أكريليك, نايلون, and other plastics can be CNC machined, but material movement, السيطرة على لدغ, moisture absorption, and tolerance behavior should be reviewed.
نعم. Material cost, القدرة على الماكينات, ارتداء الأداة, setup difficulty, متطلبات التشطيب, and inspection needs all affect CNC machining cost.
نعم. أنودة, تصفيح, التخميل, تلميع, تفجير حبة, تلوين, and coating results depend on material grade, حالة السطح, هندسة, ومتطلبات اخفاء.
Customer-supplied materials can be reviewed when material grade, شكل المخزون, certification needs, بدل الآلات, and handling requirements are clear.
Please send 3D CAD files, 2رسومات د, material grade or preferred options, application environment, ملاحظات التسامح, surface finish requirements, كمية, واحتياجات التفتيش.